The flame forming process is widely used to manufacture ship hull plates. The saddle-shaped surfaces have different curvatures in perpendicular angles of planes and the manufacturers face an anti-clastic curvature. In this article, the manufacturing of saddle-shaped surfaces utilizing the flame forming process is investigated. The spiral irradiating scheme is used for forming. In order to study...

Background: Prospectively electrocardiography (ECG)-triggered high-pitch spiral coronary computed tomography angiography (CCTA) is a unique scan mode for dual-source CT (DSCT). Our reports aim to compare image quality and radiation dose of CCTA using high-pitch spiral or sequential acquisition mode in patients with low and stable heart rates. Materials and Methods: Patients with low and stable ...

The purpose of this study is to understand the effect of pitch on raw data interpolation in multislice spiral/helical computed tomography (CT) and provide guidelines for scanner design and protocol optimization. Multislice spiral CT is mainly characterized by the three parameters: the number of detector arrays, the detector collimation, and the table increment per x-ray source rotation. The pit...

One-hundred-and-twenty-eight-section dual X-ray source computed tomography (CT) systems have been introduced into clinical practice and have been shown to increase temporal resolution. Higher temporal resolution allows low-dose spiral mode at a high pitch factor during CT coronary angiography. We evaluated radiation dose and physical image qualities in CT coronary angiography by applying high-p...

In spiral computed tomography (CT), dose is always inversely proportional to pitch. However, the relationship between noise and pitch (and hence noise and dose) depends on the scanner type (single vs multi-detector row) and reconstruction mode (cardiac vs noncardiac). In single detector row spiral CT, noise is independent of pitch. Conversely, in noncardiac multi-detector row CT, noise depends ...

Pitch spelling is the process of assigning contextually correct letter names to numeric representations for musical pitch such as MIDI numbers. Each pitch is represented by a number in MIDI and other digital formats, and the same number, say, 58 could map to A# or Bb depending on the key context. Accurate pitch spelling is a critical component of systems for automated transcription, computer mu...

Selection of spiral capillary tube for refrigeration appliances and the effect of changes in the parameters such as capillary tube dimensions i.e. capillary tube diameter, coil pitch, capillary tube length and inlet conditions of refrigerant to the capillary tube i.e. degree of subcooling, inlet pressure on the mass flow rate of the refrigerant, also investigation about the coiling effect of sp...

Single point incremental sheet metal forming is a sheet metal forming process that forms products without the complex dies and tools with low cost. In this study, the incremental sheet metal forming process has been experimentally investigated on the explosively-welded Al/Cu bimetal sheets. Also, the effects of process parameters, such as arrangement of layer`s bimetal, tool diameter and tool p...

PURPOSE To evaluate scanning parameters (conventional versus spiral CT, section thickness, and pitch) and vessel orientation in the performance of CT angiography. METHODS Conventional CT and 1.0-, 1.5-, and 2.0-pitch spiral CT acquisitions of a carotid phantom designed with vessels oriented parallel to the z-axis, 45 degrees oblique, and perpendicular to the z-axis were obtained with section ...

This paper presents a geometric interpretation of the Spiral Array model and its comparison to Lerdahl's Tonal Pitch Space and Krumhansl's spatial representation of pitch relations. The Spiral Array model is derived from a three-dimensional configuration of the Harmonic Network. The fundamental idea underlying the model is the representing of higher-level objects in the spiral's interior as con...